Cable Channel Scan: How to scan Cable Channels?

Note: You Scan the Cable Channels only when a Cable line or cable box is connected to the TV with a Coaxial cord...

If TV is on the  HOME SCREEN  then start the Setup procedure from STEP 7

IF TV displays LET'S GET STARTED SCREEN, then follow the steps below...

Step 1: Select your preferred language

Step 2: Select your Country

Step 3: Select Setup for Home Use

Step 4: Select Connect to the Internet later

Step 5: Press OK to select Let's Connect you Devices

Step 6: On Connect Devices, Select DO THIS LATER

Step 7: TV will display the HOME SCREEN, on the Home Screen select the tile Antenna TV or LIVE TV 

Step 8: Read the simple on-screen instructions, Select Setup Input and then select Start finding channels.

Step 9: If prompted, select your time zone. You’ll only need to do this if the TV can’t figure out your time zone from your Internet connection

Step 10: When prompted, select whether to add analog channels 3 and 4. Select Yes Channel 3 & 4 are needed

Step 11: TV will start scanning Antenna Channels which you can Skip to commence the Cable Channel Scan. The Cable Channel Scanning may take up to 30 minutes